Colorado · typical $350–$900
Hydro jetting
A drain cable punches a hole through a clog. Hydro jetting washes the whole pipe wall clean, using water at several thousand psi through a nozzle that pulls itself down the line. It's the fix for kitchen lines coated in grease, mains with root regrowth, and lines that clog again a few months after cabling.

Need hydro jetting help?
Answered 24/7
Including holidays and storms
Licensed local plumbers
Licensed in Colorado
Winter-ready
Frozen lines and thaw calls
Price ranges up front
Know the range before they come
Sounds like this?
- The same drain clogging again weeks or months after it was snaked
- A kitchen line that's been cleared more than once this year
- Fine roots coming back in a sewer line after cutting
- Scale or sludge seen on a camera inspection
- A slow main line that never quite drains at full speed
Jetting vs. snaking
| Drain cable (snake) | Hydro jetting | |
|---|---|---|
| What it does | Bores a hole through the clog | Scours the full pipe wall |
| Best for | Single clogs, wipes, toilet clogs, first-time backups | Grease, scale, sludge, root regrowth, repeat clogs |
| Typical cost | $125–$600 | $350–$900 |
| How long it lasts | Until buildup closes the hole again | Usually much longer, the pipe starts clean |
| Risk to old pipe | Low | Needs a camera check first on fragile or broken clay pipe |
How a jetting job runs
- 01
Camera first
A good plumber scopes the line before jetting. If the clay pipe is cracked or a section has collapsed, jetting isn't the answer and can wash soil into the line.
- 02
Choose the nozzle
A penetrating nozzle opens a full blockage; a rotating or root-cutting nozzle cleans walls and trims fine roots.
- 03
Jet from the cleanout
The hose runs from the cleanout toward the city main and is pulled back slowly, cleaning as it comes.
- 04
Camera again
A second look confirms the pipe is clean and shows whether anything structural remains.
Is it safe for older Colorado pipes?
On sound clay, cast iron or PVC, yes. The water pressure is aimed along the pipe, not into it. Where it isn't safe is a line that's already broken, offset or bellied badly, which is why the camera inspection comes first. If the scope shows a collapsed section, the plumber should tell you that instead of jetting.
What jetting pressure and flow actually mean
Residential jetters typically run at a few thousand psi with a few gallons of water per minute. Pressure gives the nozzle cutting power; flow carries the loosened debris away. The nozzle has a forward jet to open blockages and backward jets that pull the hose along and scour the walls. Different nozzles suit different jobs, which is why a good plumber asks what came out of the line before picking one.
Because the water is aimed along the pipe rather than into the wall, jetting is gentle on sound pipe. The risk comes only where the pipe is already broken or missing sections.
Signs your line needs jetting rather than another snaking
- The cable keeps coming back coated in grease or sludge.
- Roots were cut less than a year ago and the line is slowing again.
- A camera shows a ring of scale or buildup narrowing the pipe.
- You're planning to line or repair the pipe and it needs to be clean first.
- A long or sloped lateral keeps collecting solids in the same spot.
How long the results last
On a kitchen line, jetting can keep things clear for years if grease habits change. On a clay lateral with roots, results depend on the joints: jetting clears regrowth more completely than cutting, but roots return through any joint that's still open. Many homeowners with root-prone lines settle into a routine of jetting every one to three years, scheduled before the season the line usually backs up, until they're ready to line or replace the pipe.
Jetting in winter
Jetting uses a lot of water, and in a Colorado winter that water has to go somewhere. Plumbers working outdoors in freezing weather take care not to leave water standing in cleanouts or on driveways where it will turn to ice. If your cleanout is outside, clearing snow from around it before the visit makes the job quicker and safer.
Commercial-style jetting at a home: what to expect
- 01
Setup
The jetter is usually a trailer or van-mounted unit parked near the cleanout, with a hose run to the access point.
- 02
Time
A residential main line typically takes one to two hours including camera work before and after.
- 03
Noise and water
The machine is loud outside but quiet inside the house. Water goes down the line, not into the home.
- 04
Afterward
Run water from several fixtures to confirm the flow, and keep the before and after videos for your records.
Is jetting worth it for a home you're selling?
If the line has a history of clogs and you're about to list the house, jetting and a clean camera report can reassure buyers who order their own scope. It won't hide a broken pipe, and you shouldn't try to; buyers' inspectors will see it. But a clean, well-documented line removes a common negotiation point and shows the house has been maintained.
Jetting a kitchen line vs a main line
Kitchen branch lines are small, usually 1-1/2 or 2 inches, and need a smaller hose and nozzle. They're jetted from the cleanout under the sink or in the basement, and the job focuses on grease. Main lines are 4 inches or larger, often longer, and may carry roots and scale as well as grease. They're jetted from the main cleanout toward the city sewer with a heavier hose and a root-cutting or rotating nozzle.
If you're paying for jetting, ask which line is being jetted and whether both need it. A house with a greasy kitchen line and a clean main only needs the kitchen line done; a house with roots in the main may not need the kitchen line touched at all.
A note on older cast iron
Cast iron drains inside older Colorado homes build up rust scale that narrows the pipe. Specialized descaling with chain cutters or jetting can restore much of the original diameter, which often fixes chronic slow drains without replacing the pipe. It's worth asking about in homes built before the 1970s where interior drains are slow even after the main line has been cleared.
Common questions
How much does hydro jetting cost in Colorado?+
Most residential main lines run about $350 to $900, depending on the length of the line, the access point and whether a camera inspection is included.
How often should a line be hydro jetted?+
Most homes never need it routinely. Homes with heavy kitchen use or root-prone clay lines sometimes jet every one to three years.
Will hydro jetting remove tree roots?+
A root-cutting nozzle trims fine and medium roots. Thick roots may need a mechanical cutter first, and roots grow back unless the joint is repaired or lined.
Can hydro jetting damage my pipes?+
Not sound pipes. It can make a broken section worse, which is why the line should be scoped first.